diff --git a/drivers/adc/exynos-adc.c b/drivers/adc/exynos-adc.c
new file mode 100644
index 0000000..534e68d
--- /dev/null
+++ b/drivers/adc/exynos-adc.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2015 Samsung Electronics
+ * Przemyslaw Marczak <p.marczak@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <dm.h>
+#include <adc.h>
+#include <asm/arch/adc.h>
+
+struct exynos_adc_priv {
+	int active_channel;
+	struct exynos_adc_v2 *regs;
+};
+
+int exynos_adc_channel_data(struct udevice *dev, int channel,
+			    unsigned int *data)
+{
+	struct exynos_adc_priv *priv = dev_get_priv(dev);
+	struct exynos_adc_v2 *regs = priv->regs;
+
+	if (channel != priv->active_channel) {
+		error("Requested channel is not active!");
+		return -EINVAL;
+	}
+
+	if (ADC_V2_GET_STATUS_FLAG(readl(&regs->status)) != FLAG_CONV_END)
+		return -EBUSY;
+
+	*data = readl(&regs->dat) & ADC_V2_DAT_MASK;
+
+	return 0;
+}
+
+int exynos_adc_start_channel(struct udevice *dev, int channel)
+{
+	struct exynos_adc_priv *priv = dev_get_priv(dev);
+	struct exynos_adc_v2 *regs = priv->regs;
+	unsigned int cfg;
+
+	/* Choose channel */
+	cfg = readl(&regs->con2);
+	cfg &= ~ADC_V2_CON2_CHAN_SEL_MASK;
+	cfg |= ADC_V2_CON2_CHAN_SEL(channel);
+	writel(cfg, &regs->con2);
+
+	/* Start conversion */
+	cfg = readl(&regs->con1);
+	writel(cfg | ADC_V2_CON1_STC_EN, &regs->con1);
+
+	priv->active_channel = channel;
+
+	return 0;
+}
+
+int exynos_adc_stop(struct udevice *dev)
+{
+	struct exynos_adc_priv *priv = dev_get_priv(dev);
+	struct exynos_adc_v2 *regs = priv->regs;
+	unsigned int cfg;
+
+	/* Stop conversion */
+	cfg = readl(&regs->con1);
+	cfg |= ~ADC_V2_CON1_STC_EN;
+
+	writel(cfg, &regs->con1);
+
+	priv->active_channel = -1;
+
+	return 0;
+}
+
+int exynos_adc_probe(struct udevice *dev)
+{
+	struct exynos_adc_priv *priv = dev_get_priv(dev);
+	struct exynos_adc_v2 *regs = priv->regs;
+	unsigned int cfg;
+
+	/* Check HW version */
+	if (readl(&regs->version) != ADC_V2_VERSION) {
+		error("This driver supports only ADC v2!");
+		return -ENXIO;
+	}
+
+	/* ADC Reset */
+	writel(ADC_V2_CON1_SOFT_RESET, &regs->con1);
+
+	/* Disable INT - will read status only */
+	writel(0x0, &regs->int_en);
+
+	/* CON2 - set conversion parameters */
+	cfg = ADC_V2_CON2_C_TIME(3); /* Conversion times: (1 << 3) = 8 */
+	cfg |= ADC_V2_CON2_OSEL(OSEL_BINARY);
+	cfg |= ADC_V2_CON2_ESEL(ESEL_ADC_EVAL_TIME_20CLK);
+	cfg |= ADC_V2_CON2_HIGHF(HIGHF_CONV_RATE_600KSPS);
+	writel(cfg, &regs->con2);
+
+	priv->active_channel = -1;
+
+	return 0;
+}
+
+int exynos_adc_ofdata_to_platdata(struct udevice *dev)
+{
+	struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev);
+	struct exynos_adc_priv *priv = dev_get_priv(dev);
+
+	priv->regs = (struct exynos_adc_v2 *)dev_get_addr(dev);
+	if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) {
+		error("Dev: %s - can't get address!", dev->name);
+		return -ENODATA;
+	}
+
+	uc_pdata->data_mask = ADC_V2_DAT_MASK;
+	uc_pdata->data_format = ADC_DATA_FORMAT_BIN;
+	uc_pdata->data_timeout_us = ADC_V2_CONV_TIMEOUT_US;
+
+	/* Mask available channel bits: [0:9] */
+	uc_pdata->channel_mask = (2 << ADC_V2_MAX_CHANNEL) - 1;
+
+	return 0;
+}
+
+static const struct adc_ops exynos_adc_ops = {
+	.start_channel = exynos_adc_start_channel,
+	.channel_data = exynos_adc_channel_data,
+	.stop = exynos_adc_stop,
+};
+
+static const struct udevice_id exynos_adc_ids[] = {
+	{ .compatible = "samsung,exynos-adc-v2" },
+	{ }
+};
+
+U_BOOT_DRIVER(exynos_adc) = {
+	.name		= "exynos-adc",
+	.id		= UCLASS_ADC,
+	.of_match	= exynos_adc_ids,
+	.ops		= &exynos_adc_ops,
+	.probe		= exynos_adc_probe,
+	.ofdata_to_platdata = exynos_adc_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct exynos_adc_priv),
+};